雙螺旋錐形強制攪拌混料機Duplex Cone Forced Stirring Mixer

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2022-12-05 15:04:35瀏覽次數：231次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  混料類Mixing Equipment

全部產品列表

暫無信息

四川川大干燥科技工程有限責任公司

經營模式：其他

商鋪產品：26條

所在地區：

詢價 給他留言

產品簡介

雙螺旋錐形強制攪拌混料機Duplex Cone Forced Stirring Mixer

詳細介紹

一、工作原理及應用范圍介紹 Introduction of Working Principle and Scope of Application

本機自轉、公轉由一套電機及擺線針輪減速機來完成，采用兩螺桿非對稱攪拌，使物料攪拌范圍大，混合更為均勻，混合速度快，對比重懸殊、混配比較大的物料混和更為合適。

本機是一種新型、高效、大批量生產的混合設備，廣泛適用于制藥、化工、飼料等行業的各種粉粒狀物料的混合。

The rotation and revolution of this equipment are completed by one set of motor and cycloidal-pin gear speed reducer; the double-screw asymmetrical stirring is adopted to enlarge the stirring scope and produce more uniform mixing, accelerate the mixing speed; it is more applicable to mixing of materials with large specific gravity difference and mix ratio.

This is a novel, efficient and large-batch mixing equipment and widely applied in the pharmacy, chemical and feed industries for mixing carious powder and particle materials.

二、特點 Characteristics

1.設備為立式椎體結構，方便出料且出料很干凈。

2.混料是靠自轉又公轉的螺旋軸把錐體容器外圍的物料向上提升，中間的料靠自重向下移動，從而形成物料循環流來實現混料。比其他強制攪拌器而言，對物料晶體的破壞性要小些。

3.投料量單臺可達6m3，對于大批量混料特別適合。

1. The equipment has a vertical cone structure, and is convenient for and clean in discharge.

2. The mixing refers to the materials at the periphery of cone container rising by rotation and revolution of screw shaft, materials in the middle moving downward under the action of gravity, thus to form the material recycling and realize the maxing. Compared with other formed stirrers, the equipment has little damage to the material crystal.

3. The maximum feed amount per unit is up to 6m3, so it is especially applicable to large-batch mixing.

三、外形簡圖 Dimension sketch