西門子SB1221數字量信號板模塊 西門子SB1221數字量信號板模塊 

3LD 主控開關和急停開關帶有可拆除式門耦合旋轉執行器，它們都已經獲得了 UL508　標準認證?！?/p>

• 帶 300 mm 開關軸
• 可以鎖定在位置０，zui多可以帶?。场€掛鎖
• 前面板處的防護等級 IP65
• 門耦合旋轉執行器，帶集成式公差補償功能
• 采用螺釘進行安裝，或者卡裝在 35 mm 標準安裝導軌上
• 含進線側的接線端子護蓋
• 前面板 65 mm x 65 mm

可拆除式門耦合旋轉執行器，100A－250A

對于帶有門耦合旋轉執行器的隔離開關，可以采用以下 8UC7系列組件構建可拆除式門耦合旋轉執行器。

需要以下組件：

• 對于帶有 3LD2 7 和 3LD2 8 門耦合旋轉執行器的隔離開關：
  • 8UC71 10-1BB
  • 8UC71 20-3BB
  • 8UC6 011
• 對于帶有 3LD2 3 和 3LD2 4 門耦合旋轉執行器的隔離開關：
  • 8UC72 10-1BB
  • 8UC72 20-3BB
  • 8UC6 012

參見訂貨數據

3LD2 main control and EMERGENCY-STOP switches with rotary operating mechanism and detachable door coupling for base mounting

The rotary operating mechanisms of the switches for base mounting are fitted to the switchgear cubicle doors, front panels or side walls by means of four-hole mounting or central hole mounting with a standard diameter of 22.5 mm and are operated externally. They can be locked in 0 position with up to 3 padlocks of 8 mm shackle diameter.

The switches for base mounting are snapped onto 35 mm mounting rails to DIN EN 50 022 or screw-mounted on mounting plates.

The actuators are connected to the lower section of the switch through a door coupling, which can be released in its O position, and a 300 mm long switching axle. When the cubicle door is open, the switch can be protected against inadvertent operation by removing the axle from the lower section of the switch.

The mounting depth can be individually adjusted by shortening the switching axle.

Main characteristics:

• Screw or snap-on fixing onto 35 mm mounting rail (EN 50022)
• Degree of protection of front: IP65
• Rated powers from 7.5 kW to 45 kW (AC-23A)
• Rated uninterrupted currents from 16 A to 125 A (at 50/60 Hz, 380 to 440 V)
•