DID-4數顯扭力起子

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地廣州市

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2025-06-10 10:49:36瀏覽次數：16次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  硬度計

全部產品列表

暫無信息

廣州市藍河電子設備有限公司

經營模式：其他

商鋪產品：149條

所在地區：

詢價 給他留言

產品簡介

DID-4數顯扭力起子Screwtighteningcontrol●DIGITALTORQUEDRIVER　DID-4M(1)Unifythedisplaysectionaframe

詳細介紹

DID-4數顯扭力起子

Screw tightening control

● DIGITAL TORQUE DRIVER 　DID-4M

(1) Unify the display sectiona frame. It became stronger.
(2) Display Measurement Mode, Unit, Etc. on Display Section.
(3) Data Output is USB Form.
(4) Prepare each button in accordance with operation.
Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed
＊Available in: lb-in, kg-cmN-m
＊Peak, Real TimePeak Down measuring mode (selectable)
＊800 data memory.
＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
＊Programmable screw tightening counter
＊Programmable Auto Zero function resets unit to zero for easy operation
＊Both CWCCW operation
＊ASCII format output(USB)
＊Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use
＊ AC chargercarrying case included.

Specification		DID-4
Measuring range		0.020 - 4 N-m
		0.20～40 kgf-cm
		0.20～35 lbf-in
Accuracy		± 0.5% (in case of reading 499 or less = last digit +/- 3 reading)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value ( Used for Zero-Adjustment )
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about 1/ 160.
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed.
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count (count in a direction with a bundle)
Power supply		Ni-Cd chargeable battery 1.2V×4cells 600mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Bit /Socket part		HEX6.35
Weight		about 400g
Attachment		Bit?。ǎ。＃薄。＃病?/td>
Accessories (one piece each)		Dedicated AC/DC Adaptor (Charger),100～230VAC
		An inspection report, a proofreading certificate, a traceability system figure