污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
卓爾瑞華（北京）科技有限公司
卓爾瑞華（北京）科技有限公司
| 參 考 價 | 面議 |
產品型號73.831
品 牌
廠商性質代理商
所 在 地北京市
聯系方式：仇立新查看聯系方式
更新時間：2022-08-02 11:30:53瀏覽次數：604次
聯系我時，請告知來自 環保在線WIKA 73.831 帶電接點的汽包式溫度計 不銹鋼 IP65 表徑100 160mm
| 類型： | 電接點壓力式溫度計 | 尾部長度： | 100（mm） |
| 型號： | 73.831 | 精度等級： | 1 |
| 品牌： | WIKA/威卡 | 加工定制： | 是 |
| 公稱直徑： | 100 160（mm） | 測量范圍： | -80-700（℃） |
WIKA 73.831 帶電接點的汽包式溫度計 不銹鋼 IP65 表徑100 160mm
Gas-actuated thermometer with switch contacts
Model 73, stainless steel version
Gas-actuated thermometer with switch contacts model 73
Fig. top: with capillary
Fig. bottom: back mount （BM）
Applications
■ Control and regulation of industrial processes
■ Monitoring of plants and switching of electric circuits
■ Universally suitable for machine building, plant, vessel,apparatus construction and food industry
■ Temperature measurement without any contact to the medium
■ Mounting in instrument boards, control cabinets, control panels
Special features
■ Instruments meet the highest standards of measurement technology
■ Case and stem from stainless steel
■ For external mounting on pipes and tanks
■ Gauges with inductive contact for use in hazardous areas with ATEX approval
■ Gauges with electronic contact for PLC applications
Description
Wherever the process temperature must be shown in situ or in hard-to-reach locations, and where, at the same time, an electrical circuit also needs to be switched, the gas-actuated thermometers with switch contacts are ideally suited.
Due to the wide variety of possible designs, the model 73 gas-actuated thermometers can be perfectly adapted to any process connection or location. The adjustable stem and dial version can be adjusted to any angle to allow easy reading.
With the contact bulb version （without any contact with the medium）, temperature measurements are possible even when the pipe diameter is extremely small. When mounting this thermometer version, it must be ensured that the contact bulb is in contact with the measuring point over its complete length.
Switch contacts （electrical alarm contacts） make or break an electric control circuit dependent upon the position of the instrument pointer.
The switch contacts are adjustable over the full measuring range. The instrument pointer actual value pointer） moves freely across the entire scale range, independent of the setting. The set pointer can be adjusted via the window using a removable adjustment key （mounted on the terminal box）.
Switch contacts consisting of several contacts can also be set to a single set point. Contact actuation is made when the actual value pointer travels beyond or below the desired set point.
For switch contacts, sliding and magnetic snap-action contacts, reed contacts, inductive contacts - for requirements to ATEX - or electronic contacts for PLC switching are available.
For further information on the different switch contacts please see data sheet AC 08.01.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
